Caterpillar (CAT) Excavator Track Adjusters
Aftermarket track adjusters (recoil spring assembly) for Caterpillar (CAT) excavators. This page lists 2 OEM part numbers, so you can match your machine to the right number and ask for a quote.
Track adjuster and recoil spring assemblies that absorb shock and keep track tension within spec.
CAT track adjuster part numbers by model
When to replace track adjusters
- Track that will not hold tension after greasing
- Grease leaking at the cylinder seal or valve
- A broken or sagging recoil spring
- A bent or scored rod
What to confirm before ordering
- OEM number on the old assembly or in the parts book
- Complete assembly, cylinder only or spring only
- Overall length and spring dimensions
- Machine model and serial number
Safety: a recoil spring is under very high load. Have a trained technician remove and fit it.
Part numbers can change within a model series. If your model is not listed, or you are unsure, send the OEM number or machine serial number and we will check it.
Ordering
| MOQ | 10 pcs per part number; mini excavator parts (up to 6 t) from 1 set per machine |
|---|---|
| Lead time | 7–25 days, depending on part type and quantity |
| Warranty | 12 months |
| Payment | T/T, L/C |
| Shipping port | Xiamen |